Industrial Operations
Bella SCADA
Monitor and control your plant from the browser: real-time SCADA with no client software to install.
MonitoringControlAlarms
OPC UAProtocol
ModbusField connectivity
WebNo client
Internet of Things (IoT) · Ankara
Connecting the device is easy; making sense of the data is hard.IoT (Internet of Things) Solutions
We build outage-tolerant IoT platforms that bring sensors and devices together in one place. The hard part isn't connecting a device; it's making the incoming data reliable, queryable and good enough to decide on.
MQTTEdge gatewayDevice healthTime seriesRule engineMobile notifications
Most IoT projects get through the first stage — connecting the device and sending data to the center — without trouble. The stall comes afterwards: data piles up but nobody looks at it, measurements turn out inconsistent, and when a device goes down nobody knows.
That's why device health, data quality and alarms are part of the first release of every platform we build. A sensor that has gone silent is information too, and it must be reported.
If this sounds familiar
- Field measurements are collected by someone going out to read meters.
- Devices send data but nobody looks at it; it just piles up somewhere.
- A sensor has been silent for weeks and nobody noticed.
- Devices from different brands are monitored with different apps.
- Cold-chain, temperature or level deviations are discovered only when it's too late.
What it covers
Device and gateway managementDevice registration, version and last-seen time. A device that goes silent raises an alarm.
Outage-tolerant collectionBuffering at the edge; accumulated data is forwarded in order when the connection returns.
Time-series storageLong-term storage of measurements with fast querying; trends and comparisons depend on it.
Rule engineThreshold, duration and combination rules. Changing a rule doesn't wait for a software release.
Notification channelsMobile notifications, e-mail and webhooks. Who gets what, and in which situation, is defined.
SecurityDevice identity, encrypted communication and permission separation. The boundary between the device network and the corporate network is protected.
Example scenarios
Illustrative examples; the specifics are worked out during discovery at your site.
Cold chainWarehouse and vehicle temperatureTemperature sensors report at set intervals; if the time out of range exceeds the limit, the person in charge is notified and the record is kept for audits.
Tanks and silosLevel monitoring and reorderingLevel readings are collected centrally and the consumption curve shows when a refill will be needed; a low-level warning goes to purchasing.
Field devicesDevice health dashboardEach device's last-seen time, battery and signal status in one list; a silent device turns into a fault ticket.
Bella SCADA screens
Bella SCADA page
What we deliver
- Measurement definition: what, how often, with what accuracy
- Device and gateway registration and management screen
- Time-series storage and query layer
- Rule and notification definitions
- Device health and data quality dashboard
- Security and network segmentation document
How we proceed
1 · Measurement definitionWhat will be measured, how often and how accurately. No hardware is chosen before this is written down.
2 · Pilot installationValidation under field conditions with a limited number of devices.
3 · ScalingAs the number of devices grows, the behaviour of the collection and storage layer is measured.
4 · OperationMonitoring device health and data quality becomes routine.
When it's the right choice
- You need regular measurements from many scattered points.
- Knowing when a measurement doesn't arrive matters as much as the measurement itself.
- You want to connect data to an action (notification, work order, purchase order), not just watch it.
When it's not the right choice
- If one measurement point is enough; an off-the-shelf data logger is more economical.
- If you want the device itself (electronics, firmware) designed — we work on the platform side.
- If it isn't yet clear which decision the measurement will feed; that has to be defined first.
Key products for this topic
Maintenance & Asset Management
Bainten
Which engine is waiting where, which job is running late: your overhaul shop on one screen, from intake to dispatch.
Work OrderITF StepsQuality Approval
ITFStep-by-step work order
LiveWorkshop dashboard
RegisterSerial number tracking
Transport & Fleet Operations
ServisX
Did your child board the bus, where is it now: parents, drivers and the school on one platform.
RoutesLive TrackingParent Alerts
LiveVehicle location
One tapBoarding / drop-off
PushParent alerts
Frequently asked
Which communication protocols do you use?+
Mostly Modbus TCP/RTU and OPC UA on the field side, and MQTT for device-to-center transfer. The choice is made during discovery based on the devices and environmental conditions.
Where is our data stored?+
On an on-premise server or in the cloud — your choice. A common path in industrial projects is hybrid: data stays on site and only summaries go to the center.
Will we notice if a sensor breaks?+
Yes. The device's last-seen time is tracked; an alarm is raised when no data arrives within the expected interval. Devices that disappear silently are the most overlooked problem in IoT projects.
Let's talk about this.
We'll listen to your current situation and work out together where to start.